LogoLogo
  • RetroPilot Wiki
  • Introduction (WIP)
    • Column Mounted Power Steering Modules
    • Steering Rack Mounted Power Steering Modules
    • Interfacing with Vehicles
    • My car is old!
      • Steering
      • Stopping
      • Going
    • Where can I buy hardware?
  • 🚗Vehicles
    • Supported car list (WIP)
    • Volkswagen PQ25 Platform Retrofits
      • Electrical Platforms TL;DR
      • Power Steering History
      • Modules
      • Retrofit Instructions
      • PQ LHD Cars
      • Observations
      • Glossary
  • Hardware
    • 🐈Ocelot
      • Hardware
      • Firmware
    • StepperServoCAN by dzid_
  • 📱RetrOS
    • RetrOS installation
      • OnePlus 6T (fajita)
Powered by GitBook
On this page

Was this helpful?

  1. Vehicles
  2. Volkswagen PQ25 Platform Retrofits

PQ LHD Cars

PreviousRetrofit InstructionsNextObservations

Last updated 2 years ago

Was this helpful?

This will not work on PQ LHD cars, Volkswagen have not released the required firmware for LHD PQ cars, the firmware is specific to the side of the road you drive on. If you have a PQ26/MQB car you're able to use the LHD MQB firmware and all will work.

If you have a RHD PQ25 car you can go ahead and flash the correct firmware.

We're working on translating PQ to MQB and standalone MQB operation to resolve this and open up these EPS modules to non VAG retrofits. For more information, see .

🚗
Ocelot